WELCOME TO DRES LASER RUSTGONE

PROFESSIONAL LASER CLEANING SERVICES

Dres Laser Rustgone develops and produces the world’s most advanced industrial laser cleaning equipment for manual and automated use. Precise, cost-effective, and clean.

About Dres Laser Rustgone

What is Laser Cleaning?

Dres Laser Rustgone is an independent, innovative company,  focused on the development of cutting edge industrial laser cleaning technology. It started its activities in 2018 as a division of a large industrial cleaning company. Four years later, Dres Laser Rustgone became independent and started to develop its own laser cleaning systems.

Laser Cleaning is an eco-friendly process used to remove rust, paint, oxide and other contaminants from metal surfaces. Our pulsed fiber lasers leaves no surface damage at all, unlike shot blasting or chemical dipping.

TRADTIONAL V DRES LASER RUSTGONE

Traditional industrial cleaning methods are often slow and tedious. Rust removal can be time and labour consuming. Oxide removal may involve hazardous chemicals specific to each material that needs to be removed. In some cases, paint removal by sandblasting can damage the metal underneath.

Dealing with these problems usually comes at a significant cost, but Dres Laser Rustgone has changed this: it is a cost-effective solution that reduces cleaning times and maintenance. Our Laser cleaning solutions can overcome many of the problems faced with rust removal and other industrial cleaning applications.

LASER CLEANING SPECIALISTS

We are able to offer our Laser Cleaning services in our specially designed & well-equipped workshop. Please contact us today about your project by phone or email for a competitive quotation. There’s no obligation at all, just friendly, down-to-earth, helpful advice.
Rust & Corrosion Removal
Rust, Corrosion or Oxides are inevitable in ferrous and nonferrous metals’ lifespan. We can remove these without harm to the substrate or the environment.
Smoke & Fire Damage Removal
Laser cleaning is a very effective method for removing soot, carbon and other contamination after a fire. Steel structures painted walls and doors, stone and brickwork can all be cleaned.
Paint & Graffiti Removal
Laser cleaning offers a safe and chemical-free opportunity to remove graffiti, stains and paint. No need to use harsh chemicals to remove graffiti in sensitive environments.
NDT Surface Preperation
Laser cleaning offers big benefits to pre-cleaning before dye penetrant testing, increasing the speed and accuracy in which the tests can be completed
Weld & Tool Cleaning
Lasers are the ideal tool to help with metal preparation, remove contaminants including oil, grease, scale, hydrates, oxide layers & shop-primer, allowing for the best bond and weld quality between metals. After welding the slag is easily removed with a single pass saving precious time.
Heritage & Stone Restoration
Our lasers are safe, non-contact cleaning method for the removal of scale, coatings, degradation, dirt and residue build-up from precious stone and heritage pieces.
Medical & Sterile Equipment Cleaning
Laboratory equipment can now be salvaged from permanent tarnishing with the use of laser cleaning technology.

WHAT DO DRES LASER RUSTGONE?

WHY DRES LASER RUSTGONE?

Non-Abrasive

We calibrate our cleaning lasers for zero damage to your assets.

Environmentally Friendly

Our cleaning lasers use no chemicals or media, and leave no waste to clean up post-use.

Highly Portable

Our laser cleaners can be used from elevated work platforms, scaffolds, and confined spaces.

Precise

We clean only where and what you need! No overspray or damage to unwanted areas!

Instantaneous

Our laser cleaners work instantaneously. See the results immediately!

Customisable

We can clean to specific pre-determined outcomes.

De-Coating

Our Laser Cleaning technology removes the coatings, layer by layer, using no chemicals, abrasives or blasting, removing the coating layer and not damaging the base surface.

Mould Cleaning

Covering a wide range of moulds, from tire, injection, engineering and more, out Laser Cleaning service allows us to remove any contaminants without compromising the structure of the mould giving you a clean and restored mould ready to be used again.

Restoration

Our Laser Cleaning technology removes the coatings, layer by layer, using no chemicals, abrasives or blasting, removing the coating layer and not damaging the base surface.

Pre-Treatment

Pre-Treatment with a laser allows you to remove all the oils and residues on a surface in a non-destructive way. You can then apply high quality coatings to the surafce. Pre-Treatment is also well suited to surfaces that are requiring welding or brazing.

Rust Removal

Laser Rust Removal allows you to remove the layer of oxidisation quickly and effectively without damaging the metal underneateh. This is a great alternative to traditional abrasive cleaning methods.

Smoke Damage

Dres Laser Rustgone allows you to remove the burnt carbon or soot off surfaces that have been impacted by smoke damage. This can be applied without the use of harmful chemicals and scrubbing of the surface which causes damage and is time-consuming.

Get in Touch

CONTACT US TODAY

We are here to help, so contact us today to discuss your laser cleaning needs and see what our trained professionals can do for your business.

Send Us a Message

Please upload an image of your item using the uploader below.

What our clients said about Dres Laser Rustgone

Here’s what you need to know about laser cleaning, based on the questions we get asked the most.

Get in Touch

CONTACT US TODAY

We are here to help, so contact us today to discuss your laser cleaning needs and see what our trained professionals can do for your business.

Send Us a Message

Please upload an image of your item using the uploader below.

Send Us a Message

Please upload an image of your item using the uploader below.